Casemod

Welcome to my Silverstone TJ07 Inverted ATX Mod thread.

I bought a Silverstone TJ07 from Chilledpc.co.uk. I’ve had Tom and his crew to create a inverted ATX mod to the case, as well as cnc cut window and holes for wiring, and powdercoated in matte black.

I have spent a great deal of time and money on this project and here is a list of some of the things that are stuffed in the case.

Hardware:

Case: Silverstone TJ07
CPU: Intel I7 920 D0
Motherboard: EVGA X58 LE
GFX: PowerColor HD5850
RAM: 6GB G.Skill 6-7-6-18 Trident
PSU: Coolermaster Real Power 700W
Ssd: OCZ Agility Ex
Drive: Liteon iHES208 Blu-Ray

Cooling:

Reservoir: LUND Pom Plex
Pump: Laing D5
Radiator: HW-LAB GTX 480 Radiator
CPU Block: HEATKILLER Rev 3.0 LT
Gfx Block: EK – FC5850
Hose: 12mm White
Fittings: 12mm Push-on
Water: Primochill Ice Steel Blue

Price: Expensive project !

Let’s get started.

Here I have just received the case from Chilledpc.co.uk.

Motherboard, radiator and pump are now installed.

I have made an opal acrylic midplate and put the hoses through it.

Here it is almost finished there are installed a top window and all the screws are replaced with black screws. There are made a new acrylic midplate which are nicer than the first. There are now water in the system.

That’s how far I have reached it has taken me 1 ½ months to get to this point. There is much work put in this particular sleevering cables takes a very long time to do. But it also took nearly 1 month to receive the case from England.

To do list:

- Manage cables on the back. []
- Replace the screws on the back with black screws. []
- Mount a temperature probe in the top of Lund reservoir [X]
- Spraypaint the Blu-Ray Drive matt black DONE [X]
- Replace the OCZ Summit with OCZ Agility Ex [X]
- Replace the water with Primochill Ice steel blue [X]
- Replace the EK Supreme with a HEATKILLER Rev 3.0 LT [X]
- Awaiting a new OCZ Agility Ex from RMA []

To Be Continued….

I’m now finished cleaning my loop and change the water

I started at 03:00 PM and finished at 10:00 pm, so it took about 6 hours plus breaks.

The old red water was very difficult to get out of my loop.

Here is what I did:
——————–

01. Emptying my loop for the old water.
02. Filled demineralized water, and let it run 20 to 30 min.
03. Filled a mixture of 5% citric acid and 95% demineralized water and let it run 20 to 30 min.
04. Filled demineralized water, and let it run 20 to 30 min.
05. Filled a mixture of 1:10 sysclean and demineralized water, and let it run 20 to 30 min.
06. Filled demineralized water, and let it run 20 to 30 min.
07. Filled a mixture of 1:10 sysclean and demineralized water, and let it run 20 to 30 min.
08. Filled demineralized water, and let it run 20 to 30 min.
09. Filled a mixture of 5% citric acid and 95% demineralized water and let it run 20 to 30 min.
10. Filled demineralized water, and let it run 20 to 30 min.
11. Emptying my loop of demineralized water.
12. Fill the new Primo Chill Ice Steel Blue on my loop.

At some point there will be a video of the new water

I’m tired, goodnight!

Det ser squ bare godt ud det mod, især efter det er kommet over i den nye sektion hvor man ikke skal sidde og vente på at billederne eller tråden i det hele taget bliver læst

Det er og bliver en stilren løsning..

du skulle næsten have lagt kamera´et på en stille overflade mens du filmede:P det ser skummelt ud det primochill væske når du blander det!

Ser fint ud med den blå væske. Skal der snart tages nogle prof billeder af det hele?